OTTO J2 Transducer Range Details

Part of the OTTO Transducer Switch Series, these J2 Transducers feature a force input of up to 3 lbs converted into a linear voltage output on an X & Y axis. OTTO J2 Transducers use a Wheatstone bridge configuration to detect small changes in force, to produce an output voltage. KEY FEATURES • Transducer Switches • Custom Options • IAW MIL-S-81619 & MIL-STD-810 Rating OTTO J2 Transducer Switches offer short & long travel, with a range of switches and custom options.


The OTTO transducer takes a force input of up to 3 lbs. and converts it
into a linear voltage output on an X and Y axis.  Utilizing
semiconductor strain gages in a Wheatstone bridge configuration, very
small changes in force can be detected to produce an output voltage. 

Output voltages are ratiometric (proportional) to the supplied input
voltage.  We offer short travel, short travel with a pushbutton, long
travel, and long travel with a pushbutton.  Custom cases, buttons, and
wires are available upon request.


IAW MIL-S-81619 & MIL-STD-810
Actuation Force: 3.0 lbs. nominal
Travel to mechanical stop: .05 max
Exposure:  Dusttight IAW MIL-PRF-8805 Design Symbol 2


Insulation Resistance: 100MΩ min @ 50VDC
Null Temp Coefficient: +/- 0.04% of full scale per degree C max
Hysteresis: +/- 0.5% of full scale within 1 second after release
Sensitivity Temp Coefficient: +/- 0.2% full scale per degree C
Resolution: Infinite
Seal: Enclosure dusttight per MIL-PRF-8805 Design 2
Operating Force: 3.0 lbs
Operating Temp Range: -40°C to +71°C
Storage Temp Range: -55°C to +85°C
Travel: To mechanical stop 0.05 inches max
Button: Thermoplastic or anodized aluminum 
Terminals: Tin plate over copper plate over brass
Wire: MIL-W-16878/4, 12 inches min, 24 AWG
Hardware: None provided